WALL INJECTIONS
For use on concrete walls: Polyurethane material
is injected at 1200 PSI into a crack or hole in
a wall. This product expands when it comes into
contact with moisture and in doing so effectively
seals the leak.
FLASHING
Troubleshooting and identifying flashing installation
problems around drains and windows.
CONDENSATION
TESTING
Testing for water appearing on walls due to poor
drainage or condensation.
WATERPROOFING
CONSULTING
Consulting for complex and unusual situations.
INTERIOR DRAIN SYSTEMS
A viable solution to remove water from a foundation
when external waterproofing is not possible due
to landscaping or issues with existing structures.
Interior drains also may be implemented on problem
jobsites to prevent water from pushing up under
the slab or crawl space foundation.
SUMP
PUMP WITH SUMP BASIN
When positive drainage is not an option, a Sump
Pump system can be installed inside or outside a
foundation.
SUMP
PUMP WITH BATTERY BACKUP / ALARM
The “Battery Backup/Alarm” option keeps
water moving even during power outages, or in the
event that the primary sump pump fails.
ABOVE-GRADE CLEAR COATING
This process is used to seal up the veneer, or other
areas of porous brick or other materials.
ABOVE-GRADE CAVITY WALL
WATERPROOFING
Used in commercial or specialty residential applications,
this system acts as a vapor barrier in the cavity
between the main wall structure and the veneer covering.
NEGATIVE-SIDE BELOW-GRADE DAMPPROOFING
Interior walls can be coated with a cementitious
dampproofing material, which will slow down water
penetration. Often used to reduce moisture in existing
basements.
EXCAVATION
/ REPAIR
We are equipped to solve virtually any below-grade
waterproofing problem. If your foundation was never
waterproofed during its original construction, or
inferior workmanship needs to be corrected, we can
excavate foundations when necessary and perform
needed repair work or even apply a new waterproofing
system to the foundation.
SPECIALTY
DRAINAGE SYSTEMS
We can install yard drains, gutter drains, catch
basins, and can often design custom drainage systems
for your property to move standing water and reduce
moisture problems.
CRAWL
DRAIN INSTALLATION
We often install a crawl drain to move water outside
of your crawl space. This functions best when a
crawl space is properly prepped and sloped.
AUTOMATIC (POWER) VENTS
Let us install vents in your crawl space foundation
which open and close automatically as moisture is
detected in your crawl space. An excellent alternative
to manually closing and opening vents during changing
seasons.
ANTIMICROBIAL PRETREATMENTS
1
Non-toxic
to humans
2
Does
not allow mold to grow on any surface
they are applied to
3
Can
cover everything from masonry surfaces
to wood
4
Offers
flexible protection; treat the whole
house or only select problematic areas
